Contec Medical Systems Co. Ltd. CMS50K Manual De Usuario

 
 

1)  Do not use the product in high temperature or high humidity environment, the operating 

temperature of the product is 10˚C~40˚C, the operating humidity of the product is 
0%~75%RH. 

2)  Do not clean the product with water, if the device gets wet, please stop operating it. 
3)  When the device is carried from cold environment to warm or humid environment, please 

do not use it immediately. 

4)  Do not use or store the product in the following conditions: 

  areas near flame or fire; 
  areas with strong shock; 
  areas with strong electromagnetic field. 

5)  Do not disinfect the product in autoclaves or gas sterilizer. 

6)  The device has useful life for five years, when the device reach the end of life and can not 

be used, please do not discard it at will, the disposal should follow the local laws and 
regulations. 

7)  Keep the operation environment away from dust, vibration, corrosive substances, 

explosive materials, high temperature and humidity. 

8)  Strenuous action of the subject or extreme electrosurgical interference may affect the 

accuracy. 

9)  After using, refer to the relative chapter(7.1) in User Manual for instructions of cleaning 

and disinfection. 

10)  The device is worn on the arm, fixed position, too tight or too loose will affect the 

measurement accuracy. 

11)  Please don't measure this device with functional tester for the device's related 

information. 

12)  Please don't use the device during MRI or CT scanning. 

13) 

The disposal of scrap instrument and its accessories and packings(including battery, 
plastic bags, foams and paper boxes) should follow the local laws and regulations.

 

14) 

The user must check that the equipment functions safely and see that it is in proper 
working condition before being used. 

15)  The patient is an intended operator. 
16)  A warning against servicing and maintenance while the ME equipment is in use. 

1)  If subjects' skin is too dry to measure ECG, wipe them with disinfectant alcohol or 

electric salve so that the electric capability can be strengthened. 

2)  When measuring ECG, the subject should maintain a natural sitting posture with a 

straight back, and begin to measure after the waveform is stable. 

3)  When measuring ECG, the finger and arm electrodes should touch subjects' skin exactly, 

roundly and well. 

4)  When measuring SpO

2

, the subject should entirely put a finger into the black pane on the