BMC Medical Co. Ltd. YH600AYH600B Manual De Usuario
YH‐600B Pro User Manual V1.0
15 / 49
•
Heavy smokers with high carbon monoxide (CO) blood content cannot use YH-600B Pro.
CAUTION!
•
•
The device has no alarm system, and is thus unsuitable for situations that need an alarm system.
•
While working, the device should not be directly exposed to airflow sources (e.g. fan), otherwise
the accuracy of airflow monitoring will be affected.
the accuracy of airflow monitoring will be affected.
•
Do not use the device in nuclear magnetic environments or where there is high electromagnetic
interference.
interference.
•
If the device performance has unexplainable changes, if water has entered the enclosure, if the
enclosure is broken, or if the device has been dropped from a high place or hand, discontinue use
and contact BMC.
enclosure is broken, or if the device has been dropped from a high place or hand, discontinue use
and contact BMC.
10.2.1 Accessing the Initial Interface
Press and hold the On-Off/OK Button
for five seconds, and the initial interface will appear, as
shown in Figure 1-10.
Figure 1-10 Initial interface
CAUTION!
•
If the device is not used for a long time, a time setting window will automatically pop up when you
reuse it. Users need to update the date and time according to actual time, then choose “Save and
Exit” to enter the standby interface.
reuse it. Users need to update the date and time according to actual time, then choose “Save and
Exit” to enter the standby interface.
•
If the present time displayed on the device is later than the preset record starting time, the device
will immediately begin to record.
10.2.2 Accessing the Standby Interface
The device automatically enters the standby interface after it is started, as shown in Figure 1-11.
There are six icons in the standby interface: Record
, Setup
, Archives
, Tools
,
Battery
and TF card
. The yellow frame can switch among the four icons of Record, Setup,
Archives, and Tools, and when it falls on an icon, press the On-Off/OK Button
to enter the
corresponding interface. The device can be turned off if the On-Off/OK Button
is pressed and
held for five seconds in the standby interface.