Red Bear Company Limited PHAT-IOT Manual De Usuario
Features
AMPAK AP6212A Wireless Module (Broadcom BCM43438 A1 chip inside)
WiFi (802.11bgn / 2.4GHz)
BT4.1 BLE MODE only
BT4.1 BLE MODE only
Single antenna for concurrent WiFi and Bluetooth operations
Onboard PCB antenna
External antenna connector
Antenna switch for extenal antenna
External antenna connector
Antenna switch for extenal antenna
32 Kbit (4 KByte) EEPROM for DTOverlay configuration
40-pin connector
40-pin connector
WiFi: SDIO v2.0 - up to 50 MHz clock rate
Bluetooth: UART (up to 4 Mbps)
Bluetooth: UART (up to 4 Mbps)
FCC/CE certified
How to play
Prerequisites
Raspberry Pi Zero or other models with 40 pin connector header
HDMI Cable
USB Keyboard
Power adpater (5V) with micro USB connector
USB Keyboard
Power adpater (5V) with micro USB connector
SD Card with
Additional Items for RPi Zero
Mini HDMI to normal HDMI convertor
Micro to Type-A USB convertor
Micro to Type-A USB convertor
Optional
Bluetooth Keyboard
Bluetooth Mouse
Bluetooth Gamepad
Bluetooth Mouse
Bluetooth Gamepad
Setting up the boards
Stack the IoT pHAT on top of the RPi Zero
Connect the board to your TV or monitor via the HDMI cable
Connect your RPi with a wired keyboard (For associate WiFi to access point and connect Bluetooth accessories)
Power on with an micro USB cable with power adpater
Connect the board to your TV or monitor via the HDMI cable
Connect your RPi with a wired keyboard (For associate WiFi to access point and connect Bluetooth accessories)
Power on with an micro USB cable with power adpater
The IoT pHAT will also work on other 40-pin RPi boards such as RPi Model A+ and RPi 2.