I/O INTERCONNECT INC. HA815 Manual De Usuario

For example, Windows 8.1 devices are Wi-Fi Direct native. To connect, display the charms. Select

Devices, and then select Project. The first time you connect, select Add a wireless display. Then,

select the display adapter. Ignore the dialog box that tells you to press a button on the device.
To connect using WiFi:

NOTE:

To use presentation mode on a device with a Mac or Linux operating system, you must

install Oracle Java 7 and change the Java security level to medium.

On your electronic device, connect to the SSID as shown on the home screen.

Open your browser if it does not open automatically. If you are connecting for the first time,

select Continue when the welcome page appears. If you are not connecting for the first time,

select the Admin tab, enter the password, and go to step 7.

Enter a PIN in the PIN Code box. Enter the same PIN in the Confirm PIN Code box.

Enter a PIN in the Admin. password box. Enter the same PIN in the Confirm Admin. Password

box.

Select OK.

If an error message appears, repeat steps 3–5. Otherwise, click Continue.

If you do not need to connect to the Internet, go to step 10. Otherwise, select the Admin tab,

enter the administrator password, select OK. Select Apply after you have configured the

settings. After the settings validate, select Continue to configure other settings or Reboot Device

to apply the settings.

To connect to the internet, select the Home tab, and then select Connect. Select the configured

network from the list of Wi-Fi Networks.

Enter your password, and then select OK.

10.

Select Use Presentation Mode Application. Download and run the utility.

11.

Select the START button to project the electronic device’s screen on the remote display, the

STOP button to stop projecting, or the EXIT button to close the utility. The appearance of these

buttons might change depending on your operating system.

Step 4: Preventing Sleep or Hibernation

If your computer or other electronic device enters Sleep, Hibernation, or an equivalent mode, the

display adapter will be disconnected. See your device’s documentation for instructions on preventing

Sleep or Hibernation.

Disconnecting the display adapter

Disconnect the display adapter from the device.

Disconnect the USB cable from the display adapter and then from the power source.

Store the display adapter and accessories in the carrying bag.

Disconnecting the display adapter