Vital Home Systems LLC 1050 Manual De Usuario

P a g e

| 2

1050 Control Panel

Overview

I. Identifying Parts on the 1050

FRONT VIEW

Green/Red LED – Power Indicator
Green indicates the Power Status.
Green

LED ON indicates Power ON.

Green LED flash indicates AC failure.

RED indicates Program / Learn / Range Test
Mode.
Red LED ON indicates Program / Learn Mode.
Red LED flash indicates Range Test Mode.

RED LED – Dialer Indicator
Red LED ON indicates Dial Mode.
RED LED flashes while voice message is played.

ORANGE LED – Fault Indicator
The Orange LED will light up when any fault
situation is detected, then turn off when all
fault conditions are restored.

NUMERIC KEY

SET KEY
Press this key for setting the telephone
numbers.

CLR KEY
Press this key to exit Program Mode and return
to Normal Mode.

TEST KEY

While in Program Mode, press this key to enter
TEST Mode.

ACK KEY

Press this key to shut off the siren after alarm is
sounded. This key may also be used for deleting
a digit, canceling the selection, aborting the
current application and returning to the Normal
Mode, etc.
It may also be used to stop playing the local
voice message.

 When there is Fault situation indicated by

Orange LED ON, pressing “ACK” will play the
corresponding voice message for 30
seconds or till CLR is pressed.

 When there is no Fault, pressing “ACK” will

give no response.

# KEY
Press this key to dial #

 KEY
Press this key to delay dial for three (3) seconds

Speaker

MIC – Audio Microphone to record custom
announcement

Side and Rear Views

Phone Jack Marked “Line”
This jack connects the phone line from the wall.

Phone Jack Marked “Phone”
This jack connects line to the Telephone unit.

Power – 5V Micro USB Jack and Battery Switch
DC 5V Micro USB and Battery Switch cover.

Wall Mounting Bracket

SET

CLR

TEST

ACK