Справочник Пользователя для Vital Home Systems LLC 1050
P a g e
| 2
© 2015 Vital Home Systems
1
3
1050 Control Panel
Overview
I. Identifying Parts on the 1050
FRONT VIEW
Green/Red LED – Power Indicator
Green indicates the Power Status.
Green
Green indicates the Power Status.
Green
LED ON indicates Power ON.
Green LED flash indicates AC failure.
RED indicates Program / Learn / Range Test
Mode.
Red LED ON indicates Program / Learn Mode.
Red LED flash indicates Range Test Mode.
Mode.
Red LED ON indicates Program / Learn Mode.
Red LED flash indicates Range Test Mode.
RED LED – Dialer Indicator
Red LED ON indicates Dial Mode.
RED LED flashes while voice message is played.
Red LED ON indicates Dial Mode.
RED LED flashes while voice message is played.
ORANGE LED – Fault Indicator
The Orange LED will light up when any fault
situation is detected, then turn off when all
fault conditions are restored.
The Orange LED will light up when any fault
situation is detected, then turn off when all
fault conditions are restored.
NUMERIC KEY
SET KEY
Press this key for setting the telephone
numbers.
Press this key for setting the telephone
numbers.
CLR KEY
Press this key to exit Program Mode and return
to Normal Mode.
Press this key to exit Program Mode and return
to Normal Mode.
7
TEST KEY
While in Program Mode, press this key to enter
TEST Mode.
TEST Mode.
8
ACK KEY
Press this key to shut off the siren after alarm is
sounded. This key may also be used for deleting
a digit, canceling the selection, aborting the
current application and returning to the Normal
Mode, etc.
It may also be used to stop playing the local
voice message.
sounded. This key may also be used for deleting
a digit, canceling the selection, aborting the
current application and returning to the Normal
Mode, etc.
It may also be used to stop playing the local
voice message.
When there is Fault situation indicated by
Orange LED ON, pressing “ACK” will play the
corresponding voice message for 30
seconds or till CLR is pressed.
corresponding voice message for 30
seconds or till CLR is pressed.
When there is no Fault, pressing “ACK” will
give no response.
# KEY
Press this key to dial #
Press this key to dial #
KEY
Press this key to delay dial for three (3) seconds
Press this key to delay dial for three (3) seconds
Speaker
MIC – Audio Microphone to record custom
announcement
announcement
Side and Rear Views
Phone Jack Marked “Line”
This jack connects the phone line from the wall.
This jack connects the phone line from the wall.
Phone Jack Marked “Phone”
This jack connects line to the Telephone unit.
This jack connects line to the Telephone unit.
Power – 5V Micro USB Jack and Battery Switch
DC 5V Micro USB and Battery Switch cover.
DC 5V Micro USB and Battery Switch cover.
Wall Mounting Bracket
4
5
6
8
9
2
1
2
3
4
5
6
7
8
9
0
*
#
SET
CLR
TEST
ACK