Macnica Americas Inc. ODSY001 Manual De Usuario
Odyssey MAX 10 FPGA and BLE Sensor Kit
User Guide Odyssey MAX 10 FPGA and BLE Sensor Kit -
63
© Mpression by Macnica Group
Figure 8-19 Flash Resident Personalities
Now select option “1” and select an available flash location, “07” in this case, to upload the
custom personality configuration to the device at slot 7 in the flash.
Note: The BLE sensor board contains enough flash memory to hold 10 personalities that include an
FPGA design programming file and 5 additional personalities without FPGAs. Slots 1-10 can be
used for personalities with or without FPGAs and slots 11-15 are only for personalities without
FPGA designs included.
FPGA design programming file and 5 additional personalities without FPGAs. Slots 1-10 can be
used for personalities with or without FPGAs and slots 11-15 are only for personalities without
FPGA designs included.
Figure 8-20 Upload to Flash Personality #7
Use the Tera Term “File -> Send File” pull-down menu to select the GATT_xxx.bin file saved to
the PC from section 0 above. Be sure to select the “Binary” option to ensure a successful
transfer. A window will briefly open up showing the transfer. Depending on the size of the
transfer. A window will briefly open up showing the transfer. Depending on the size of the