Macnica Americas Inc. ODSY001 Manual De Usuario
Odyssey MAX 10 FPGA and BLE Sensor Kit
User Guide Odyssey MAX 10 FPGA and BLE Sensor Kit -
65
© Mpression by Macnica Group
Figure 8-23 Custom Personality Loaded into Flash
8.4.1
Update FPGA design with Console Menu
If the user chooses to update an FPGA design JAM file via the Console Menu, the user must first
load the associated personality, inclusive of a JAM file, into an open flash location. See section 8.4
above. Keep in mind, the FPGA programming JAM file will only be programmed into the MAX 10
FPGA if the associated personality has the “FPGA Required” option set. Note: Personalities with
FPGA images are only allowed in slots 1 thru 10. Slots 11-15 are too small in terms of allocated
flash memory space.
load the associated personality, inclusive of a JAM file, into an open flash location. See section 8.4
above. Keep in mind, the FPGA programming JAM file will only be programmed into the MAX 10
FPGA if the associated personality has the “FPGA Required” option set. Note: Personalities with
FPGA images are only allowed in slots 1 thru 10. Slots 11-15 are too small in terms of allocated
flash memory space.
Access the Console Menu by means of the steps outlined in section 8.4 below.
Use Console Menu option “0” to list the personality slots to see which are populated. Be sure
Use Console Menu option “0” to list the personality slots to see which are populated. Be sure
to have a valid personality loaded into a slot (1-10) before attempting to load the FPGA JAM
file
file
Load JAM file to the chosen personality slot with option menu 5