Brighton Technologies Pty Ltd BMTX-500 Manual De Usuario
Page | 5
Operation of your BTG Paging System
Setting the time display on your BTG Transmitter
Your BTG Transmitter conveniently displays a 24‐hour clock when the transmitter is idle. To set the
correct current time on the transmitter, please follow the following steps:
correct current time on the transmitter, please follow the following steps:
1. Press the first icon button on the top row of buttons on the transmitter. The icon looks like a
clock and calendar.
2. The display will then ask for a password. Enter 9513.
3. Press the orange Enter key above the green Send key.
4. Your transmitter will now display “Set Date/Time” Please enter the current date and time in the
format of DD‐MM‐YY for date, and HH:MM for the 24 hour time.
5. Press the orange Enter button when finished.
6. You will then be returned to the main idle screen.
Sending a Page
After removing a BTG pager from its charging rack, the pager will first do a self test, vibrating 2 times
and flashing its LED lights. This test lets you know that your pager is functioning properly. Take note of
the pager number on the LED screen, or on the sicker on the front of the pager. When you need to call
the pager back, use your transmitter to send a page:
and flashing its LED lights. This test lets you know that your pager is functioning properly. Take note of
the pager number on the LED screen, or on the sicker on the front of the pager. When you need to call
the pager back, use your transmitter to send a page:
1. From your transmitter, enter the pager number on the keypad.
2. Press the green send button on the right hand side.
Your pager has now been altered. Return the pager to a charging rack to clear the alert and prepare it
for its next use.
for its next use.
Changing the length of time that a Customer pager tones
There may be a situation where you would like to change the length of time that a BTG Customer Pager
alerts for. By default, the Customer Pager will tone continuously for 2 minutes. This may be needed if
your Customer Pagers are not immediately returned to the charging rack after food collection, or if the
pager is not retuned back to the rack until after an appointment is completed.
alerts for. By default, the Customer Pager will tone continuously for 2 minutes. This may be needed if
your Customer Pagers are not immediately returned to the charging rack after food collection, or if the
pager is not retuned back to the rack until after an appointment is completed.