Brighton Technologies Pty Ltd BMTX-500 Manual De Usuario
Page | 7
could set your BTG Customer pagers to Vibrate and Flash only, forgoing the beep to keep ambient noise
down, and the evening more enjoyable for your customers.
down, and the evening more enjoyable for your customers.
These changes are done from your BTG transmitter. It is also highly recommended to make sure that all
of the pagers are collected in from your floor before changing this feature, as not to alert customers that
may be waiting to be called.
of the pagers are collected in from your floor before changing this feature, as not to alert customers that
may be waiting to be called.
To perform this procedure, all charging racks must be unplugged at the wall. When you unplug your
charging racks, you may notice that all of the pagers in that rack vibrate 2 times and flash their LED’s.
This is normal behaviour and can be ignored. After this procedure is complete, all of your pagers will
alert at the same time and using the alert type you changed it to. This tone will let you know that the
pagers received the instructions correctly. To reset the pagers, simply re‐plug the racks into the wall.
charging racks, you may notice that all of the pagers in that rack vibrate 2 times and flash their LED’s.
This is normal behaviour and can be ignored. After this procedure is complete, all of your pagers will
alert at the same time and using the alert type you changed it to. This tone will let you know that the
pagers received the instructions correctly. To reset the pagers, simply re‐plug the racks into the wall.
Your desktop transmitter can set your customer pagers to operate in one of the following alert types. :
Type of Alert
Vibration Only
LED Lights Only
Beep Only
Vibrate, LED Lights, and Beep
Vibrate and LED Lights Only
Vibrate and Beep Only
LED Lights and Beep Only
LED Lights Only
Beep Only
Vibrate, LED Lights, and Beep
Vibrate and LED Lights Only
Vibrate and Beep Only
LED Lights and Beep Only
After all of the charging racks in your system are unplugged, return to the transmitter and follow the
following procedure:
following procedure:
1. Press the second icon button on the top row of buttons on the transmitter. The icon looks like a
musical note.
2. The display will then ask for a password. Enter 9513.
3. Press the orange Enter key above the green Send key.
4. Your transmitter will now display “Set Alert Style”
5. Use the * and the # to scroll between options.
6. Press the green send button to transmit the new settings to the pagers..
At this point, all of the pagers in your system should tone with the alert that you selected. To reset the
pagers and stop the tones, plug the Charging Racks back into the power.
pagers and stop the tones, plug the Charging Racks back into the power.