Kramer Electronics TP-582R Prospecto
TP-582R
1:2 HDMI Plus Bidirectional RS
−
232, Ethernet & IR over Twisted Pair Receiver
The TP
−
582R is a high
−
quality twisted pair
receiver for HDMI, Ethernet 100BaseT,
bidirectional RS
bidirectional RS
−
232 and IR signals. The
TP
−
582T selects one of two HDMI inputs,
and converts it with the Ethernet 100BaseT,
RS
RS
−
232 and IR input signals to a twisted
pair signal. The TP
−
582R converts the
twisted pair signal back to Ethernet
100BaseT, RS
100BaseT, RS
−
232, IR and two HDMI
outputs, and de
−
embeds the audio to
S/PDIF and TOSLINK® audio outputs.
Max. Data Rate
- 2.25Gbps.
HDBaseT Technology.
HDTV Compatible.
HDCP Compliance.
HDMI Support
- HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby
TrueHD, DTS
−
HD, CEC).
3D Pass-Through.
EDID PassThru
- Passes EDID signals between the source and display.
Bidirectional RS-232 Interface
- Commands and data can flow in both directions via the RS
−
232 interface, allowing
status requests and control of the destination unit.
Ethernet Interface
- Passes 100BaseT.
System Range
- Up to 100m (330ft).
Cable
- Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's
BC
−
DGKat524, BC
−
DGKat623 and BC
−
DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non
−
Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Control
- Front panel.
Indicators
- Status LEDs for input selection, output, link and power.
Compact MegaTOOLS®
- 2 units can be rack mounted side
−
by
−
side in a 1U rack space with the optional RK
−
T2B
universal rack adapter.
FEATURES