Intel 1.00 GHz YK80542KC0013M Manual De Usuario

16

Datasheet 

..

All system bus outputs should be treated as open drain signals and require a high level source 
provided by the V

CTERM

 supply.

AGTL+ inputs have differential input buffers which use V

REF

 as a reference level. AGTL+ output 

signals require termination to V

CTERM

. In this document, “AGTL+ Input Signals” refers to the 

AGTL+ input group as well as the AGTL+ I/O group when receiving. Similarly, “AGTL+ Output 
Signals” refers to the AGTL+ output group as well as the AGTL+ I/O group when driving.

The Power Good (PWRGOOD) signal and Test Access Port (TAP) connection input signals use a 
non-differential receiver with levels that are similar to AGTL+. No reference voltage is required for 
these signals. The TAP Connection Output signals are AGTL+ output signals.

The Itanium 2 processor system bus requires termination on both ends of the bus. The Itanium 2 
processor system bus supports both on-die and off-die termination controlled by two pins, TERMA 
and TERMB. Please see the TERMA and TERMB pin description in 

The HSTL clock signals are the differential clock inputs for the Itanium 2 processor. The SMBus 
signals and LVTTL power pod signals are driven using the 3.3 V CMOS logic levels listed in 

 and 

, respectively. 

contains functional descriptions of all system bus signals and 

LVTTL power pod signals. Further descriptions of the system management signals are contained in 

. The signals listed under the “Power” and “Other” group are described here: 

AGTL+ Input Signals

BPRI#, BR[3:1]#, DEFER#, GSEQ#, ID[9:0]#, IDS#, RESET#

1

, RS[2:0]#, 

RSP#, TRDY#

1. Signals will not be terminated on-die even when on-die termination (ODT) is enabled. See Intel

Hardware Developer’s Manual for further details.

AGTL+ I/O Signals

A[49:3]#, ADS#, AP[1:0]#, BERR#, BINIT#, BNR#, BPM[5:0]#

, BR0#, 

D[127:0]#, DBSY#, DEP[15:0]#, DRDY#, HIT#, HITM#, LOCK#, REQ[5:0]#, 
RP#, SBSY#, STBN[7:0]#, STBP[7:0]#, TND#

AGTL+ Output Signals

FERR#, THRMTRIP#, DBSY[1:0]#, DRDY[1:0]#, SBSY[1:0]#

Special AGTL+ Asynchronous 
Interrupt Input Signals

A20M#, IGNNE#, INIT#, LINT[1,0], PMI#

Power Good Signal

PWRGOOD

HSTL Clock Signals

BCLKn, BCLKp

TAP Input Signals

TCK, TDI, TMS, TRST#

TAP Output Signals

TDO

System Management Signals

3.3V, SMA[2:0], SMSC, SMSD, SMWP, THRMALERT#

Power Signals

GND, VCTERM

LVTTL Power Pod Signals

CPUPRES#, OUTEN, PPODGD#

Other

TERMA, TERMB, TUNER1, TUNER2, VCCMON, VSSMON