Intel i7-3920XM Extreme AW8063801009607 Manual De Usuario
Los códigos de productos
AW8063801009607
Datasheet, Volume 2
185
Processor Configuration Registers
2.10.29 MSI_CAPID—Message Signaled Interrupts Capability ID
Register
When a device supports MSI it can generate an interrupt request to the processor by
writing a predefined data item (a message) to a predefined memory address.
writing a predefined data item (a message) to a predefined memory address.
The reporting of the existence of this capability can be disabled by setting MSICH
(CAPL[0] @ 7Fh). In that case walking this linked list will skip this capability and
instead go directly from the PCI PM capability to the PCI Express* capability.
(CAPL[0] @ 7Fh). In that case walking this linked list will skip this capability and
instead go directly from the PCI PM capability to the PCI Express* capability.
2.10.30 MC—Message Control Register
System software can modify bits in this register, but the device is prohibited from doing
so.
so.
If the device writes the same message multiple times, only one of those messages is
ensured to be serviced. If all of them must be serviced, the device must not generate
the same message again until the driver services the earlier one.
ensured to be serviced. If all of them must be serviced, the device must not generate
the same message again until the driver services the earlier one.
B/D/F/Type:
0/6/0/PCI
Address Offset:
90–91h
Reset Value:
A005h
Access:
RO
Size:
16 bits
Bit
Access
Reset
Value
RST/
PWR
Description
15:8
RO
A0h
Uncore
Pointer to Next Capability (PNC)
This field contains a pointer to the next item in the capabilities
This field contains a pointer to the next item in the capabilities
list which is the PCI Express capability.
7:0
RO
05h
Uncore
Capability ID (CID)
Value of 05h identifies this linked list item (capability structure)
Value of 05h identifies this linked list item (capability structure)
as being for MSI registers.
B/D/F/Type:
0/6/0/PCI
Address Offset:
92–93h
Reset Value:
0000h
Access:
RO, RW
Size:
16 bits
BIOS Optimal Default
00h
Bit
Access
Reset
Value
RST/
PWR
Description
15:8
RO
0h
Reserved (RSVD)
7
RO
0b
Uncore
64-bit Address Capable (B64AC)
Hardwired to 0 to indicate that the function does not implement
Hardwired to 0 to indicate that the function does not implement
the upper 32 bits of the Message Address register and is
incapable of generating a 64-bit memory address.
This may need to change in future implementations when
This may need to change in future implementations when
addressable system memory exceeds the 32b/4 GB limit.