Nortel 8301AC 100-240 VAC Power Supply DS1405A14-E5 Manual De Usuario
Los códigos de productos
DS1405A14-E5
Bulletin Number: P-2006-0039-Global-Rev2
Date: 22 May 2006
Date: 22 May 2006
Ethernet Switch and Ethernet Routing Switch
EUED Market Impact Notification
EUED Market Impact Notification
R
EVISION
H
ISTORY
Date
Revision #
Summary of Changes
22 May 2006
Rev 2
Some availability dates were changed. Marketing
positioning has been further clarified.
positioning has been further clarified.
Customer Last Opportunity to order in
EU for RoHS non-compliant product:
EU for RoHS non-compliant product:
31
st
May 2006
for “put on the market” before 1
st
July 2006
Customer last ship date in EU for EUED
non-compliant hardware
non-compliant hardware
30
th
June 2006
Market Regions Affected:
European Economic Area (EU member
states, plus Liechtenstein, Iceland and
Norway)
states, plus Liechtenstein, Iceland and
Norway)
Introduction
This bulletin announces the intentions with respect to Ethernet Switch and Ethernet
Routing Switch compliance to the European Union Environmental Directive (EUED)
concerning the Restriction of Hazardous Substances (RoHS). This bulletin does not have
any bearing on other Nortel products plans to comply with the EUED directives.
Nortel’s environmental strategy is provided in more detail at the following link:
http://www.nortelnetworks.com/corporate/community/environment/life_cycle/directives.html
The RoHS Directive , 2002/95/EC identifies in Article 4, mandatory requirements for all EU
member states to implement a Reduction of Hazardous Substances (RoHS).
RoHS requirements impose restrictions on the type and quantity of materials used in the
manufacturing and construction of Electronic and Electrical Equipment (EEE). Producers must
implement RoHS requirements in order to meet the deadline of 1
st
July, 2006. RoHS requires
producers to eliminate or to reduce below the permissible levels the following six substances:
Lead, Mercury, Cadmium, Hexavalent Chromium, Poly-Brominated Biphenyls (PBB) and Poly-
Brominated Diphenyl Ethers (PBDE). EUED provides an exemption for lead in solders for network
infrastructure equipment for switching, signalling, transmission as well as network management for
telecommunications based on a potential for decreased reliability when lead free solder is used. In
this case, the equipment is referred to as “5/6 compliant”.
Lead, Mercury, Cadmium, Hexavalent Chromium, Poly-Brominated Biphenyls (PBB) and Poly-
Brominated Diphenyl Ethers (PBDE). EUED provides an exemption for lead in solders for network
infrastructure equipment for switching, signalling, transmission as well as network management for
telecommunications based on a potential for decreased reliability when lead free solder is used. In
this case, the equipment is referred to as “5/6 compliant”.