Troy-Bilt 12180 Manual De Usuario

13

Read this Section of the manual thor-
oughly before you start the engine.  Then,
take the time to familiarize yourself with
the basic operation of the tiller before
using it in the garden.  Find an open, level
area and practice using the tiller controls
without the tines engaging the soil (put
tines in “travel” setting).  Only after
you’ve become completely familiar with
the tiller should you begin using it in the
garden.

Perform the following maintenance
during the first hours of new operation
(see “Maintenance” section in this manual
and in the Engine Owner’s Manual).

1.  Change engine oil after first 2 hours of
new engine operation.

2.  Check for loose or missing hardware
on unit.  Tighten or replace as needed.

3.  Check tension on forward drive belt
after first 2 hours of operation.

4.  Check transmission gear oil level after
first 2 hours of operation.

Make the following checks and perform
the following services before starting the
engine.

1.  Read the “Safety” and “Controls”
sections in this manual.  Read the
separate Engine Owner’s Manual provided
by the engine manufacturer.

2.  Check that the wheels are in the
WHEEL DRIVE position (wheel pins must
be through the wheel hubs and the wheel
shaft holes).

3.  Check unit for loose or missing
hardware.  Service as required.

4.  Check engine oil level.  See Engine
Owner’s Manual.

5.  Check that all safety guards and
covers are in place.

6.  Check air cleaner and engine cooling
system.  See Engine Owner’s Manual.

7.  Attach spark plug wire to spark plug.

8.  Fill the fuel tank with gasoline
according to the directions in the separate
Engine Owner’s Manual.  Follow all
instructions and safety rules carefully.