Britax CS Manual De Usuario

20

21

IMPORTANT: Britax recommends that the Versa-

®

Place the child seat forward-facing on the 

1 

vehicle seat. Ensure the bottom of the child 

seat base is in full contact with the vehicle seat.

TIP: You may need to raise or remove the vehicle 

head restraint to achieve best fit of the child 

seat.

If the vehicle is equipped with a designated tether anchor for the 

2 

chosen seating position, remove the Versa-Tether

 

from the pouch 

and place it up and over the child seat back.
Rotate the lock-off lever to open the forward-facing lock-off farthest 

3 

from where the vehicle belt will be buckled.
Pull vehicle belt out, then pass it 

4 

over the LATCH bar, through the 

forward-facing belt path, then over the LATCH bar on the opposite 

side (Fig. B).

Verify that the vehicle belt is not twisted and 

5 

is routed over the LATCH bars, then buckle 

(Fig. C).
Push the child seat firmly into the vehicle 

6 

seat while removing slack first from the lap 

portion of the vehicle belt, then the shoulder 

portion (Fig. D).
Hold the shoulder belt tight, then rotate 

7 

the lock-off until the vehicle belt is secured 

(Fig. E).

Attach the Versa-Tether

8 

® 

hook to the 

designated tether anchor (if available 

according to the vehicle owner’s manual) for the chosen seating 

position. Remove all slack from the tether to secure. Store excess 

webbing in the tether pouch. See pages 25–28. 
Verify that the vehicle belt is tight and the child seat is secure. 

9 

a

d

b

e

c

WARNING!