Britax CS Manual De Usuario

22

23

Verify that the vehicle belt is not twisted, is 

4 

routed under the LATCH bars, then buckle 

(Fig. B).
Push the child seat firmly into the vehicle 

5 

seat while removing slack from the vehicle 

belt (Fig. C).
Attach the Versa-Tether

6 

® 

hook to the 

designated tether anchor (if available 

according to the vehicle owner’s manual) 

for the chosen seating position. Remove all slack from the tether 

to secure. Store excess webbing in the tether pouch. See pages 

25–28. 
Verify that the vehicle belt is tight, locked and the child seat is 

7 

secure. 

a

c

b

IMPORTANT: Britax recommends that the Versa-Tether be used at 

Place the child seat forward-facing on the vehicle seat. Ensure the 

1 

bottom of the child seat base is in full contact with the vehicle seat.

TIP: You may need to raise or remove the vehicle head restraint to achieve 

best fit of the child seat.

If the vehicle is equipped with a designated tether anchor for the 

2 

chosen seating position, remove the Versa-Tether

 

from the pouch 

and place it up and over the child seat back.
Pull the vehicle belt out, then pass it 

3 

under the LATCH bar, through 

the forward-facing belt path, then under the LATCH bar on the 

opposite side (Fig. B). 

WARNING!