Zebra HW46211 Manual De Usuario

13185L-002 Rev. A  1/24/06

110XiIIIPlus Maintenance Manual

Page 4-39

Maintenance

Section 4

Align the Take-Label (Label-Available) Sensor 

The take-label sensor activates only when the printer is set to Peel-Off Mode. This mode 

requires the Rewind or Peel option. The media take-label sensor pair is not installed on 

printers without this option.

 for the location of the take-label sensor components. When the beam 

is broken, the printer is inhibited from printing or feeding in Peel-Off Mode only. It may, 

however, accept additional label formats if the buffer is not full.

If you encounter problems, ensure the printer is set to Peel-Off Mode and the sensors are 

aligned. Sensors are aligned at the factory or when the media rewind spindle option is 

installed. Refer to your User Guide and do a manual calibration of the media and ribbon.

 

Take-Label

Sensors