Zebra HW46211 Manual De Usuario

Page 4-40

110XiIIIPlus Maintenance Manual

13185L-002 Rev. A  1/24/06

Section 4

Maintenance

Adjust the Media Tracking 

Rewind Mode

Refer to 

. If the media walks from side to side, tears, or wrinkles against the 

media rewind tracking plate, it is necessary to adjust the rewind plate assembly. 

1. Remove the rewind plate assembly and loosen the two adjustment nuts attaching the 

hook plate to the rewind plate.

2. Refer to 

Figure 4-23

. Move the outer end of the hook plate up to force the media 

toward the rewind tracking plate or move the outer end of the hook plate down to 
force the media away from the rewind tracking plate.

3. Tighten the adjustment nuts, and reinstall the rewind plate assembly and print a 

number of test labels. If problems persist, readjust the hook plate.

Hook Plate

Adjustment

Nuts

Adjustment

Slot

Top Lip

Bottom Lip

Note • Moving the outer end of the hook plate up forces the media toward the 
rewind tracking plate; moving this end down moves the media away from the 
tracking plate. The opposite effect occurs if the same adjustments are made on 
the inner end of the hook plate.