Zebra HW46211 Manual De Usuario

13185L-002 Rev. A 1/24/06

110XiIIIPlus Maintenance Manual

Page 2-47

Operations Overview

Section 2

Set LCD Adjust

This parameter adjusts the brightness of your display.

Press the right oval key to increase the value (increases the brightness). Press the left oval 

key to decrease the brightness.

Press NEXT/SAVE to display FORMAT CONVERT.

Set Format Convert

This parameter selects the bitmap scaling factor. The first number is the original dpi 

(dots per inch) value for which the ZPL format was written; the second number is the dpi 

to which you wish to scale (usually the dpi of the printer being used).

Press the right or left oval key to display other choices.

Press NEXT/SAVE to display IDLE DISPLAY.

Idle Display

This parameter selects the LCD options for the real-time clock.

Press the right or left black oval key to display other choices.

Press NEXT/SAVE to display RTC DATE.

Default: 10

Range: 00 to 19

Default: None

Selections: None, 150 

→ 300, 150 → 600, 200 → 600, 300 → 600

LCD ADJUST +13

-

+

FORMAT CONVERT

NONE

Note • If the default value is not selected, pressing either black oval key briefly 
displays the firmware version of the printer.

Default: Firmware version

mm/dd/yy (24 hour), mm/dd/yy (12 hour), dd/mm/yy (24 hour),
dd/mm/yy (12 hour)

IDLE DISPLAY

FW VERSION