Cisco CAB-DSU-RJ45= Manual De Usuario
Cisco 1602−R Ethernet/Serial Modular Router
Cable Specifications
Cable Specifications
Document ID: 46784
Introduction
Prerequisites
Requirements
Components Used
Conventions
Cable Specifications
Console
Ethernet Interface
Serial Interface
WAN Interface Cards (WICs)
Front Panel LEDs
Rear Panel LEDs
Related Information
Prerequisites
Requirements
Components Used
Conventions
Cable Specifications
Console
Ethernet Interface
Serial Interface
WAN Interface Cards (WICs)
Front Panel LEDs
Rear Panel LEDs
Related Information
Introduction
This document provides the cabling specifications for the Cisco 1602−R Ethernet/Serial Modular Router with
56K Data Service Unit (DSU).
56K Data Service Unit (DSU).
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the following hardware:
Cisco 1602−R Ethernet/Serial Modular Router with 56K DSU (4−wire)
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
Cable Specifications
The 1602−R Ethernet/Serial Modular Router has one Ethernet interface, one Serial interface with 56 K Data
Service Unit (DSU) (4−wire), and one WAN interface card (WIC) slot.
Service Unit (DSU) (4−wire), and one WAN interface card (WIC) slot.