Cisco CAB-U-RJ45= Manual De Usuario
Cisco 1604−R Ethernet/ISDN−BRI Modular Router
Cable Specifications
Cable Specifications
Document ID: 46787
Introduction
Prerequisites
Requirements
Components Used
Conventions
Cabling Specifications
Console
Ethernet
ISDN BRI U Interface
ISDN BRI Cable Specifications
ISDN S/T Interface for a downstream ISDN phone or fax
WAN Interface Cards
Front Panel LEDs
Rear Panel LEDs
Related Information
Prerequisites
Requirements
Components Used
Conventions
Cabling Specifications
Console
Ethernet
ISDN BRI U Interface
ISDN BRI Cable Specifications
ISDN S/T Interface for a downstream ISDN phone or fax
WAN Interface Cards
Front Panel LEDs
Rear Panel LEDs
Related Information
Introduction
This document provides the cabling specifications for the Cisco 1604−R Ethernet/ISDN−BRI Modular router.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the hardware version:
Cisco 1604−R Router
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
Cabling Specifications
The Cisco 1604−R router has one Ethernet interface, one Integrated Services Digital Network (ISDN)
interface, one ISDN phone port, and one ISDN−Basic Rate Interface (BRI) WAN interface card (WIC) slot.
interface, one ISDN phone port, and one ISDN−Basic Rate Interface (BRI) WAN interface card (WIC) slot.