Gigaset HC450 S30852-H1799-R101 Manual De Usuario
Los códigos de productos
S30852-H1799-R101
12
Setting up the Gigaset HC450 door intercom system
Gigaset HC450 / en / A31008-M1799-R101-1-7619 / TFE_Setting.fm / 13.02.2007
Ve
rs
ion 4,
16
.09.
2005
Setting up the
Gigaset HC450 door
intercom system
Gigaset HC450 door
intercom system
Once you have installed your HC450 door
intercom system, you can set up the door
intercom at your convenience using a
compatible handset. Before you can do
this, however, you must register the door
intercom system with the base station.
Registering with the base station
Make sure that the control unit is con-
nected to a power supply. If the LED on
the HC450 control unit is flashing, it
means that it is not yet connected with
the base station.
u Set the 4-digit system PIN of your base
u Set the 4-digit system PIN of your base
station to "0000" if necessary (refer to
the manual for your telephone).
u Press the registration/paging key on
the base station for approx. 3 seconds.
The registration/paging key is located
on the right beside the charging cradle.
u Go to the control unit and press the
pushbutton (see illustration on p. 10)
there within 20 seconds. The LED on
the control unit will light up continu-
ously once it has been registered (the
LED will return to flashing when a call is
underway between the door intercom
and base station). If registration does
not take place despite a number of
attempts, reduce the distance between
the base station and control unit (the
base station can be disconnected from
the telephone network to do this) and/
or briefly disconnect the control unit
from the power supply before com-
mencing registration.
u Following successful registration,
"
Intercom
" will appear in the list of inter-
nal users. This preset name can be
changed via the handsets (refer to the
user guide for the handset).
Setting functions
Starting programming
Call up the menu for the door intercom
settings. This initial programming step is
always the same for all functions to be set.
u
Initiate an internal call and
select the internal user
"
Intercom
".
c
Press the talk key.
¨
Press the display key.
~
Enter the 4-digit system PIN of
the door intercom if the PIN
has been changed from the
delivery version (0000) and
press
§OK§
.
You are now in the menu in which you can
make settings for the door intercom.
Changing the display language
You can view the display texts in different
languages. The languages available
include English, German, Italian, Dutch
and French.
Call up the menu for the settings
Call up the menu for the settings
¢
Language
¢
§OK§
The current setting is displayed.
Note:
Change the system PIN of the base station
once more (refer to the manual for your tele-
phone). This ensures, among other things,
that only designated handsets can be regis-
tered with the base station.
Note:
The menu for changing the display language is
called up automatically during startup