Philips B5 B5/12 Manual De Usuario

10

EN

Note

 

•

Spatial calibration takes around three minutes.

 

•

Surround sound improvement is only noticeable if 

the portable left and right speakers (surround) were 

improperly placed, or if there is strong surround effect 

in the music you play.

 

•

If the portable left and right speakers are swapped in 

placement, during calibration L<->R is displayed for few 

seconds, then the calibration completes.

 

•

During calibration, you may press CALIBRATION 

to cancel calibration, and the settings returns to the 

default.

 

•

If the spatial calibration fails, an error message is 

displayed on the display panel, such as FAIL (fail), and 

the settings returns to the default.

 

•

If the spatial calibration fails, try the spatial calibration 

again, and make sure that the calibration points 

described at the beginning of this chapter are fully met.

5  Use your SoundBar

This section helps you use the SoundBar to play audio 

from connected devices.
Before you start

•

Make the necessary connections described in 

the quick start guide and the user manual.

•

Switch the SoundBar to the correct source for 

other devices.

Adjust the volume

1 

Press +/- (Volume) to increase or decrease a 

volume level.

•

To mute sound, press  .

•

To restore the sound, press   again or 

press +/- (Volume).

For the portable left and right speakers only

1 

When the portable left and right speakers 

are wirelessly connected to the main unit (in 

SURROUND ON DEMAND mode), press 

REAR VOL.+/- to increase or decrease a volume 

level. 

Choose your sound

This section helps you choose the ideal sound for 

your video or music.

Surround sound mode

Experience an immersive audio experience with 

surround sound modes.

•

Press MOVIE to create a surround listening 

experience.

•

Press MUSIC to create two-channel or multi-

channel stereo, ideal for listening to music. 

Voice clarity

It makes human voice more clear and outstanding for 

listening.

1 

Press VOICE to switch to voice clarity.

 

»

When voice clarity is turned on, VOICE is 

displayed.

2 

To exit this sound mode, press MOVIE or 

MUSIC to select other sound mode.

CLOSE TO ME (close to me)

For ultimate clear sound without disturbing your 

neighbors, place both the portable left and right 

speakers close to you, and activate this feature (to 

mute the main unit).

Note

 

•

It is applicable only when the portable left and right 

speakers are wirelessly connected to the main unit (or 

SURROUND ON DEMAND mode switches on).

 

•

If CLOSE TO ME (close to me) is turned on, the 

functions for MOVIE and MUSIC buttons are disabled.

1 

Press and hold VOICE for three seconds to 

activate the feature.

 

»

CLOSE TO ME (close to me) scrolls once 

on the display panel.

 

»

The main unit is muted.

2 

To exit this sound mode, press and hold VOICE 

again for three seconds. 

 

»

The previous sound mode switches in.

Equalizer

Change the high frequency (treble) and low 

frequency (bass) settings of the SoundBar.

1 

Press TREBLE +/- or BASS +/- to change the 

frequency.

B5_12_UM_V2.0.indb   10

9/23/2014   1:26:48 PM