Philips B5 B5/12 用户手册
产品代码
B5/12
10
EN
Note
•
Spatial calibration takes around three minutes.
•
Surround sound improvement is only noticeable if
the portable left and right speakers (surround) were
improperly placed, or if there is strong surround effect
in the music you play.
•
If the portable left and right speakers are swapped in
placement, during calibration L<->R is displayed for few
seconds, then the calibration completes.
•
During calibration, you may press CALIBRATION
to cancel calibration, and the settings returns to the
default.
•
If the spatial calibration fails, an error message is
displayed on the display panel, such as FAIL (fail), and
the settings returns to the default.
•
If the spatial calibration fails, try the spatial calibration
again, and make sure that the calibration points
described at the beginning of this chapter are fully met.
5 Use your SoundBar
This section helps you use the SoundBar to play audio
from connected devices.
Before you start
Before you start
•
Make the necessary connections described in
the quick start guide and the user manual.
•
Switch the SoundBar to the correct source for
other devices.
Adjust the volume
1
Press +/- (Volume) to increase or decrease a
volume level.
•
To mute sound, press .
•
To restore the sound, press again or
press +/- (Volume).
For the portable left and right speakers only
1
When the portable left and right speakers
are wirelessly connected to the main unit (in
SURROUND ON DEMAND mode), press
REAR VOL.+/- to increase or decrease a volume
level.
Choose your sound
This section helps you choose the ideal sound for
your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
•
Press MOVIE to create a surround listening
experience.
•
Press MUSIC to create two-channel or multi-
channel stereo, ideal for listening to music.
Voice clarity
It makes human voice more clear and outstanding for
listening.
1
Press VOICE to switch to voice clarity.
»
When voice clarity is turned on, VOICE is
displayed.
2
To exit this sound mode, press MOVIE or
MUSIC to select other sound mode.
CLOSE TO ME (close to me)
For ultimate clear sound without disturbing your
neighbors, place both the portable left and right
speakers close to you, and activate this feature (to
mute the main unit).
Note
•
It is applicable only when the portable left and right
speakers are wirelessly connected to the main unit (or
SURROUND ON DEMAND mode switches on).
•
If CLOSE TO ME (close to me) is turned on, the
functions for MOVIE and MUSIC buttons are disabled.
1
Press and hold VOICE for three seconds to
activate the feature.
»
CLOSE TO ME (close to me) scrolls once
on the display panel.
»
The main unit is muted.
2
To exit this sound mode, press and hold VOICE
again for three seconds.
»
The previous sound mode switches in.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1
Press TREBLE +/- or BASS +/- to change the
frequency.
B5_12_UM_V2.0.indb 10
9/23/2014 1:26:48 PM