Kramer Electronics TP-578H Prospecto
TP-578H
HDMI, Audio & Data over DGKat Twisted Pair Receiver
The TP
−
578H is a DGKat twisted pair
receiver for HDMI, IR and control signals.
The unit receives a DGKat twisted pair
signal from a compatible Kramer DGKat
transmitter (such as a TP
The unit receives a DGKat twisted pair
signal from a compatible Kramer DGKat
transmitter (such as a TP
−
577VH) and
decodes it into HDMI, balanced and
unbalanced stereo, S/PDIF digital audio, IR
and RS
unbalanced stereo, S/PDIF digital audio, IR
and RS
−
232 signals.
Max. Data Rate
- 4.95Gbps (1.65Gbps per graphic channel).
HDTV Compatible.
HDCP Compliant.
HDMI Support
- x.v. Color™, 3D and 7.1 multi
−
channel audio.
DGKat™ Signal Integration
- Kramer’s unique technology for converting TMDS as well as control and communication
to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed
specifically for optimum performance.
specifically for optimum performance.
Kramer Equalization & re-Klocking™ Technology
- Rebuilds the digital signal to travel longer distances.
K-Link™
- Kramer's technology for controlling the device from a remote controller and passing data to external
devices.
PowerConnectPlus
- A single connection to the transmitter or the receiver powers both units. The higher voltage
PowerConnectPlus also powers regular PowerConnect devices via auto
−
negotiation.
Configurable External Control.
Analog and Digital Audio De-Embedding.
Indicators
- LEDs for mirroring.
System Range
- Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC
−
DGKat524 cable. Up to
90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC
−
DGKat623 cable. Up to 100m (330ft) at 1080i or
up to 90m (295ft) at 1080p on shielded BC
−
DGKat7a23 cable.
Cable
- Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's
BC
−
DGKat623 or BC
−
DGKat7a23 cables. Note that the transmission range depends on the signal resolution,
graphics card and display used. The distance using non
−
Kramer CAT 6 and CAT 7 cables may not reach these
ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Controls
- IR data transceiver.
FEATURES