Intel S1400SP4 DBS1400SP4 Manual De Usuario
Los códigos de productos
DBS1400SP4
On-board Connector/Header Overview
Intel® Server Board S1400SP TPS
Revision 1.0
Intel order number G64248-001
84
Table 29. Front Panel USB Connector Pin-out
Signal Description
Pin# Pin#
Signal Description
P5V_USB_FP
1
2
P5V_USB_FP
USB2_P11_F_DN
3
4
USB2_P13_F_DN
USB2_P11_F_DP
5
6
USB2_P13_F_DP
GROUND
7
8
GROUND
10
TP_USB2_FP_10
8.3.3
Intel
®
Local Control Panel Connector
The server board includes a 7-pin connector that is used when the system is configured with the
Intel
Intel
®
Local Control Panel with LCD support. On the server board this connector is labeled
“LCP” and is located on the front edge of the board. The following table provides the pin-out for
this connector:
this connector:
Table 30. Intel
®
Local Control Panel Connector Pin-out
Signal Description
Pin#
SMB_SENSOR_3V3STBY_DATA_R0
1
GROUND
2
SMB_SENSOR_3V3STBY_CLK
3
P3V3_AUX
4
FM_LCP_ENTER_N_R
5
FM_LCP_LEFT_N_R
6
FM_LCP_RIGHT_N_R
7
8.4 On-Board Storage Connectors
The server board provides connectors for support of several storage device options. This
section provides a functional overview and pin-out of each connector.
section provides a functional overview and pin-out of each connector.
8.4.1
SATA Connectors
The server board includes two white ports SATA connectors capable of transfer rates of up to
6Gb/s. On the server board this connector is labeled as “SATA_0” and “SATA_1”. The following
table provides the pin-out for these connectors:
6Gb/s. On the server board this connector is labeled as “SATA_0” and “SATA_1”. The following
table provides the pin-out for these connectors:
Table 31. AHCI SATA Controller Connector Pin-out
Signal Description Pin#
GROUND
GROUND
1
SATA_TXP
2
SATA_TXN
3
GROUND
4
SATA_RXN
5
SATA_RXP
6
GROUND
7
8.4.2
Multiport Mini-SAS/SATA Connectors
The server board includes three 40-pin high density multiport mini-SAS/SATA connectors
labeled as “SCU_0”, “SCU_1” and “SATA_2-5”.
“SCU_0” and “SCU_1” connectors support up to four SATA or SAS ports each. By default, only
the connector labeled “SCU_0” is enabled and has support for up to four SATA ports capable of
labeled as “SCU_0”, “SCU_1” and “SATA_2-5”.
“SCU_0” and “SCU_1” connectors support up to four SATA or SAS ports each. By default, only
the connector labeled “SCU_0” is enabled and has support for up to four SATA ports capable of