Tripp Lite 2200 VA UPS SMART2200RMXL2UP Manual De Usuario
Los códigos de productos
SMART2200RMXL2UP
Rated input current (at
maximum load)
maximum load)
13.3A (120V), 14.6A (110V), 16.0A (100V)
Nominal Input Voltage(s)
Supported
Supported
100V AC; 110V AC; 120V AC
Nominal input voltage
description
description
Nominal voltage selection via back panel dipswitches
UPS input connection
type
type
5-20P
UPS Input cord length (ft.)
10
UPS Input cord length (m)
3
Recommended Electrical
Service
Service
20A 100/110/120V
BATTERY
Full load runtime
(minutes)
(minutes)
5 min. (1920w)
Half load runtime
(minutes)
(minutes)
13 min. (960w)
Expandable battery
runtime
runtime
Extended runtime supported via optional external battery packs
External battery pack
compatibility
compatibility
DC system voltage (VDC)
48
Battery recharge rate
(included batteries)
(included batteries)
Less than 4.5 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
cartridge (internal UPS
battery replacement)
Battery Access
Front panel battery access door
Battery replacement
description
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
description
Automatic voltage regulation (AVR) maintains regulated line power output with an input voltage range of 83-145
(120V), 87-133 (110V), 83-121 (100V)
(120V), 87-133 (110V), 83-121 (100V)
Overvoltage correction
Voltage reduction of 12% applies when input is between 127 and 145 (120V), 116 and 133 (110V), 111 and 121
(100V)
(100V)
Undervoltage correction
Voltage boost of 12% applies when input voltage is between 95 and 108 (120V), 87 and 99 (110V), 83 and 90
(100V)
(100V)
Severe undervoltage
correction
correction
Voltage boost of 24% applies when input voltage is between 83 and 95 (120V only)
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms
Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches
support nominal voltage selection and charge rate
support nominal voltage selection and charge rate