Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES Manual De Usuario
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Los códigos de productos
WNDAP360-PES
Advanced Configuration
90
ProSafe Dual Band Wireless-N Access Point WNDAP360
Note:
You cannot configure wireless bridging when automatic channel
selection is enabled. On the basic Wireless Settings screen, make
sure that Auto is not selected from the Channel / Frequency
drop-down list (see
sure that Auto is not selected from the Channel / Frequency
drop-down list (see
Configure a Point-to-Point Wireless Network
In point-to-point bridge mode, the wireless access point communicates with another
bridge-mode wireless station. Use wireless security to protect this communication. The
following figure shows an example in which two wireless access points (APs) function in
point-to-point bridge mode:
bridge-mode wireless station. Use wireless security to protect this communication. The
following figure shows an example in which two wireless access points (APs) function in
point-to-point bridge mode:
Figure 53.
To configure a point-to-point wireless network:
1.
Select the 802.11b/bg/ng or 802.11a/na tab.
2.
Configure the wireless access point (AP1 on LAN Segment 1 in the previous figure) as a
point-to-point bridge:
point-to-point bridge:
a. Select Configuration > Wireless Bridge. The Bridging screen displays (see the
following figure).
b. Select the Enable Wireless Bridging check box. The Local MAC Address field is a
nonconfigurable field that shows the MAC address of the wireless access point.
c. Select the Wireless Point-to-Point Bridge radio button. The screen adjusts.
Wireless PC card
in a notebook computer
in a notebook computer
Wireless PC card
in a notebook computer
in a notebook computer
Point-to-point
bridge mode
bridge mode
Point-to-point
bridge mode
bridge mode
Router
Hub or switch