Gossen Metrawatt M817S Mains-analysis device, Mains analyser M817S Hoja De Datos

2-4

Connecting Voltage Measurement Cables

Description: Voltage measurement cables are provided as standard accessories and are 

stored in a cable pouch as part of the measurement cable set, P/N 116042-G6. Each 

cable set consists of a cable and alligator clip.

Voltage Rating: Direct connection of all voltage measurement cables are rated at 600 

Vrms max. For measuring voltages greater than 600 Vrms, potential transformers (PTs) 

must be used. 

Contents: The voltage measurement cables are shown on page 2-5 (positioned relative 

to their actual use). A cable set consists of six, 6-foot channel measurement cable 

assemblies (probes), each with a detachable, alligator jaw, safety clip assembly 

(maximum jaw opening, 3/4 in (20 mm)). The safety clip assemblies are red (+) and 

black (-) for each of the four channels. One cable each of red (channel A), yellow 

(channel B), blue (channel C), and grey (channel D), and two each of white are 

provided. 

A pouch for storage of the cables and the AC adapter/battery charger is included in the 

contents of the measurement cable set, but is not shown in the figure.

There are two optional fuse accessory kits available for use with the measurement 

cables. One kit (P/N FVA-1) contains one fused voltage adapter and one measurement 

connecting Red cable 50 cm in length. The other kit (P/N FVA-4) contains four voltage 

adapters and four measurement connecting cables 50 cm in length (one Red, one 

Yellow, one Blue, and one Grey).

The single fuse voltage adapter kit is used for one single voltage measurement input. 

While the four fuse voltage adapter kit is used for a three phase and neutral voltage 

measurement inputs.