Gossen Metrawatt M817S Mains-analysis device, Mains analyser M817S Hoja De Datos

5-11

CH 5/ Start Menu

After setting up current probe configurations, the Scale Factor screen is displayed.

STEP 1: From the Current Probe 

Selection screen, press Next to 

display the Scale Factor Setup.

• If voltage and current 

connections are made without 

using any current or potential 

transformer devices, the scale 

factor is set to the default value 

of 1. Press Next and go to page 

5-12.

• To enter new scale factors, 

press the numeric field of the 

Volts/Amps channel where you 

want to enter new scale factors. 

Proceed to Step 2.

• Press Cancel to quit and return 

to Start menu.

MARK105

STEP 2: Enter a new scale factor 

value using the numeric keypad. 

Press OK to accept the new scale 

factor.

• Press 

.. .

 

. . 

to clear and retype 

numeric values.

• Press x1000 to multiply the 

value by 1000.

• Press Cancel to discard 

changes and retain previous 

scale factor value, and return to 

Scale Factor Setup screen.

MARK105b