Greisinger GPB 3300 Digital Barometer 600782 Manual De Usuario
Los códigos de productos
600782
H55.0.21.6C-02
Operating Manual GPB 3300
page 5 of 7
_____________________________________________________
_____________________________________________________________________________
10 Configuration of the device
Follow these instruction to configure the functions of the device:
Switch the device off.
Press mode button and keep it pressed. Turn the device on. Release the mode button after the
Press mode button and keep it pressed. Turn the device on. Release the mode button after the
segment test ( ) finished. The first parameter “P.OFF“ is displayed.
If a parameter should be changed press key up or down ( ) the present setting of the
parameter will be shown and can be changed via up/down keys.
The parameter setting is confirmed by pressing
.
Jump to the next parameter with
.
Parameter
value
information
button
buttons
P.OFF
Auto Power-Off (turn-off delay) factory setting: 20 min.
1 … 120
Auto Power-Off (turn-off delay) in minutes. If no key is pressed for the
time adjusted in this parameter, the device is automatically switched off to
safe battery power. (adjustable range 1 to 120 min)
time adjusted in this parameter, the device is automatically switched off to
safe battery power. (adjustable range 1 to 120 min)
OFF
automatic power-off is deactivated (continuous operating)
UNIT
Unit and range of display
factory setting: nbar = mbar
nbAr
300.0 … 1100.0 mbar, resolution 0.1 mbar
nnHG
225.0 … 825.0 mmHG, resolution 0.1 mmHG
Sea-level correction
factory setting
: off
OFF
Sea-level correction off
ON
Sea-level correction on
ALTI
Altitude input for sea-level correction
factory setting
: 340
-
500 … 9000
-
500 … 9000 m selectable
INIT
Restore to factory settings
NO
Settings are kept
YES
Restoring device to factory settings
Pressing again stores the settings, the instruments restarts (segment test)
Please note:
If there is no key pressed within the menu mode within 2 minutes, the
configuration will be cancelled, the entered settings are lost!
configuration will be cancelled, the entered settings are lost!