C&E FS20 4-channel Surfa-mount Switching capacity (max.) 3680 VA 46135 Hoja De Datos

• Simultaneously press the two buttons of the button combination assigned to the desired

switching channel on the remote control for one to three seconds (1 s to 3 s).

• The channel’s control indicator/LED on the remote switch blinks. The time measurement for

the desired on-time begins.

• After the desired amount of time has expired press both buttons on the remote control again

simultaneously for one to three seconds (1 s to 3 s).

The timer duration for the selected switching channel is now programmed.



If the time measurement is not ended manually, the timer programming mode
will automatically be ended after 270 minutes (4 hours 30 min).

The timer is then programmed for an on-time of 270 minutes (4 hours 30 min).

There are two different ways of doing this:

• Briefly press the control button of the programmed channel on the remote switch.

or:

• Briefly press the right button of the assigned button combination on the remote control .

The channel of the remote switch socket and connected consumer loads can, of course, be
switched-off manually at any time. There are two different ways of doing this:

• Briefly press the control button of the programmed channel on the remote switch.

or:

• Briefly press the left button of the assigned button combination on the remote control.