C&E FS20 4-channel Surfa-mount Switching capacity (max.) 3680 VA 46135 Hoja De Datos

The remote switch can be integrated into the address system of the FS20 wireless control
system via the latter’s addressing scheme using single addresses, function groups, local and
global masters. More detailed information on exactly how this address system is structured is
provided in the user manual of each transmitter belonging to the FS20 wireless control system.

Up to 4 address types can be assigned to each switching channel of the remote switch within
the address system of the FS20 wireless control system.

This makes it possible, for example, to operate the remote switch remotely from several
transmitters with the same or different address types.

You can find more detailed information on the address system in the user manual of each
remote control belonging to the FS20 wireless control system.

To assign several address types to the remote switch, repeat the programming steps
described in section 6.



The remote switch can store up to four different addresses or address types.

To delete a reception channel from the saved list, proceed as follows:

• Set the device to programming mode as described in section 7. b).

• Now press and hold (for at least 0.4 seconds) your remote control a button that has been

assigned to the reception channel that you wish to delete.

• Afterwards, the programming mode is automatically abandoned and the corresponding

channel is deleted from the remote switch’s address list.