Mediola FS20 Wireless master slave transmitter 1-channel Max. range (open field) 100 m 1057-97 Hoja De Datos

With the factory settings the function ‘power-on command’ is active when
the master is turned on and the ‘power-off command’ when it is turned off.
If you desire the opposite functionality, for instance if the device is meant to
signal when the washing machine or dryer is done (power consumption
sinks), then you must make the following settings:
• Press the button on the ‘FS20 FMS’ for longer than 5 seconds.

The LED lights up for 2 seconds and then goes out. After 5 seconds the
LED lights up again. Release the button.

• The LED blinks in intervals, 1x each.

• The ‘FS20 FMS’ is now in the set-up mode for ‘preselection house

code mode’.

• Now press the control button briefly 3 times in a row. The LED blinks in

intervals, 4x each.

The ‘FS20 FMS’ is now in the set-up mode ‘preselection positive flank
mode’.

• Press the button until the LED goes out (approx. 2 seconds). The ‘FS20

FMS’ is now in ‘positive flank mode’.

• The LED blinks in intervals, 1x each. The ‘FS20 FMS’ is now in

command mode ‘no command’.

• Now press the button 2 x. The LED blinks in intervals, 3x each.

The ‘FS20 FMS’ is in command mode ‘power-off command’.

• Press the button for 2 seconds.

After a total of 2 seconds, the LED goes out. Release the button.