Insys GSM EASY 4.1 11-02-01-03-01.027 Manual De Usuario
Los códigos de productos
11-02-01-03-01.027
INSYS GSM 4.2 easy
Initial Operation
January 07
21
4
Initial Operation
4.1
Installation Overview
4.1.1 Installation for configuration
The serial interface (RS 232) of the INSYS GSM 4.2 easy and the configuration PC
are connected for initial operation and configuration.
The cable used for the RS232 is the default supplied 9-pin cable with 9–pin D-SUB
plug / 9-pin D-SUB jack.
are connected for initial operation and configuration.
The cable used for the RS232 is the default supplied 9-pin cable with 9–pin D-SUB
plug / 9-pin D-SUB jack.
4.1.2 Installation for the operation with Moeller easy
For the operation with the Moeller easy, the 11.8-inch INSYS adapter cable is used.
The part of the cable with the fastening nuts is connected to the easy PC cable of
the Moeller device, which is connected to the Moeller easy device on the other
side. The part of the cable with the fastening nuts is connected to the D-SUB jack
of the INSYS GSM 4.2 easy device.
Note:
The part of the cable with the fastening nuts is connected to the easy PC cable of
the Moeller device, which is connected to the Moeller easy device on the other
side. The part of the cable with the fastening nuts is connected to the D-SUB jack
of the INSYS GSM 4.2 easy device.
Note:
Every time the PC and the Moeller easy device are unplugged, the
INSYS GSM 4.2 easy must be restarted (press reset key).
INSYS GSM 4.2 easy must be restarted (press reset key).
Firmware update
The firmware for the INSYS GSM 4.2 easy, the flashloader software and the
according user manual can be found on the supplied CD-ROM.
The firmware for the INSYS GSM 4.2 easy, the flashloader software and the
according user manual can be found on the supplied CD-ROM.