Insys GSM EASY 4.1 11-02-01-03-01.027 Manual De Usuario
Los códigos de productos
11-02-01-03-01.027
INSYS GSM 4.2 easy
Initial Operation
January 07
23
6. Select the following standard setting for the serial interface in the menu
Interface
at the configuration PC:
If the INSYS GSM 4.2 easy is in an undefined state (e.g. due to a previous
configuration), reset it to the factory settings (button Send default settings), if
required. If the INSYS GSM 4.2 does not respond to the transmission of
commands, select the button Synchronize RS232 to automatically adapt the
baud rate and the data format.
configuration), reset it to the factory settings (button Send default settings), if
required. If the INSYS GSM 4.2 does not respond to the transmission of
commands, select the button Synchronize RS232 to automatically adapt the
baud rate and the data format.
7. Enter the PIN number (will be stored in the INSYS GSM 4.2 easy):
In the tab Basic settings you will find the setting New PIN. Enter the PIN for the
SIM card.
The PIN is stored in the INSYS GSM and is used for logging into the GSM
network at every restart. Transfer settings by activating the button Send
settings
SIM card.
The PIN is stored in the INSYS GSM and is used for logging into the GSM
network at every restart. Transfer settings by activating the button Send
settings
.