Ea Elektro Automatik EA Elektro-Automatik 06230319, 1 Output Variable DC Power Supply, , Bench 06230319 Hoja De Datos

Page 61

EA Elektro-Automatik GmbH

Helmholtzstr. 31-33 • 41747 Viersen

Germany

Fon: +49 2162 / 3785-0

Fax: +49 2162 / 16230

In order to avoid the accidental alteration of a value during manual operation the rotary knobs or the touchscreen 

can be locked so that no alteration of values will be accepted without prior unlocking.

In the main page, tap the lock symbol 

 (upper right corner).

In the settings page you can select between the complete HMI (“

Lock all”) 

lock or except for the On/Off button (“

ON/OFF possible”)

Activate the lock with 

. The status “

Locked” as shown in the figure to the 

right. 

If an attempt is made to alter something whilst the HMI is locked, a requester appears in the display asking if the 

lock should be disabled.

Tap any part of the touchscreen of the locked HMI, or turn one of the rotary knobs or press the button “On/

Off” (in complete lock situation).

This request pop-up will appear: 

.

Unlock the HMI by tapping on “Tap to unlock” within 5 seconds, otherwise the pop-up will disappear and 

the HMI remains locked.

The menu “

Profiles” serves to select between a default profile and up to 5 user profiles. A profile is a collection of 

all settings and set values. Upon delivery, or after a reset, all 6 profiles have the same settings and all set values 

are 0. If the user changes settings or sets target values then these create a working profile which can be saved to 

one of the 5 user profiles. These profiles or the default one can then be switched. The default profile is read-only. 

Loading the default profile is equivalent to a reset. 
The purpose of a profile is to load a set of set values, settings limits and monitoring thresholds quickly without 

having to readjust these. As all HMI settings are saved in the profile, including language, a profile change can also 

be accompanied by a change in HMI language.
On calling up the menu page and selecting a profile the most important settings can be seen, but not changed.

Tap the touch area 

 on the main screen

In the menu page, tap 

.

In the selection screen (right) choose between user profile 1-5 in which 

the settings are to be saved. The profile will then be displayed and the 

values can be checked, but not changed. 

Save using the touch area 

.