Brennenstuhl 1172620 Hoja De Datos

17

1 

Plug the standing bracket on to the retaining bracket. Bolt the U-Bolt structure with the  
U-Bolts.

  6 

Standing bracket (U-Bolt structure) 

  9 

Adjusting screw 

16 Bolt 

spacer 

13 

Casing (Lamp body)

22 Washer 

23 Lock 

washer 

2

Fasten the lamp body in the middle of the U-bolt structure. For this purpose use the bolt 
spacer and the adjusting screw. The light bracket can be set through the adjusting screw.  

IMPORTANT: Before the initial operation, check all the bolted connections. 

3 

Press the ON / OFF switch. The work lamp will be switched on or off accordingly. 

Pull the mains plug before opening the work lamp! 
Let the work lamp cool before touching it (at least 15 minutes). 
Coming into contact can lead to burns.

Set the work lamp on its „back“. Press the rubber lip upwards. 

  3 

Protective cover 

11 Rubber 

lip 

13 

Casing (Lamp body)

1

Screw out the 4 protective covering bolts from the protective cover. Remove the protective 
cover. 

  3 

Protective cover 

11 Rubber 

lip 

  2 

Protective cover bolt

2

3

11

13

3

11

2

9

6

16

13

22

23