Freescale Semiconductor Daughter Card for DEMOEM DCF51EM256 DCF51EM256 Manual De Usuario
Los códigos de productos
DCF51EM256
16
DEMOEM User Manual
Figure 4-4: Found New Hardware Wizard Dialog (4 of 4)
Click the “Finish” button to exit the “Found New Hardware Wizard.”
If the DEMOEM hardware interface driver is now properly installed on your
system, the green USB LED (D1000) on the DEMOEM Base Board should be
illuminated. In addition, if you turn on the system power of the DEMOEM you
will see the red Power LED (D2) illuminate.
system, the green USB LED (D1000) on the DEMOEM Base Board should be
illuminated. In addition, if you turn on the system power of the DEMOEM you
will see the red Power LED (D2) illuminate.
5
OPERATING MODES
5.1
Overview
The DEMOEM’s Embedded Multilink circuitry, featured hardware
components, and optional external BDM header make it a versatile
development tool. Below are some of the featured operating modes of the
DEMOEM.
components, and optional external BDM header make it a versatile
development tool. Below are some of the featured operating modes of the
DEMOEM.
5.2
Debug Mode
A host communicates with the DEMOEM through the Embedded Multilink
circuitry. Either the CodeWarrior Development Studio or P&E’s HCS08/CFV1
software tools will work with the DEMOEM. Please refer to Section 8 -
circuitry. Either the CodeWarrior Development Studio or P&E’s HCS08/CFV1
software tools will work with the DEMOEM. Please refer to Section 8 -