Freescale Semiconductor Daughter Card for DEMOEM DCF51EM256 DCF51EM256 Manual De Usuario

18

DEMOEM User Manual

This PC-based application is used to display the logic analyzer data on the 
PC. The logic analyzer data is displayed in real-time and each waveform may 
be paused, zoomed, and printed.

To start using this application, please plug in a USB cable into the DEMOEM 
board. Once the USB and Power LEDs light up, indicating the proper 
enumeration on the USB port, click on the Open DEMO and Graph Pins 
button. The logic channel graphs should be reflecting data captured from the 
IO pins connected to the IN0 and IN1 header pins on the DEMOEM 
evaluation board.

This PC-based application is included on the DVD-ROM that accompanies 
the DEMOEM, and may also be found at:

http://www.pemicro.com/fixedlinks/demotoolkit.cfm.

This PC-based application acts as a standard serial port terminal application 
on the PC. It works with standard serial ports as well as the virtual serial port 
on the DEMOEM board. The application includes settings to adjust the COM 
port number, baud rate, parity, and number of data bits. There is a button to 
take a file on the PC and transmit it out of the serial port. There are also 
delays which are automatically inserted into the transmission output to 
prevent overruns. It is recommended that these defaults not be changed.