Freescale Semiconductor Daughter Card for DEMOEM DCF51EM256 DCF51EM256 Manual De Usuario

DEMOEM User Manual

19

The terminal window may be set for full duplex or half duplex. In full duplex 
mode, only received characters are displayed in the terminal window. In half 
duplex mode, both transmitted and received characters are displayed.

To start using this application, please choose COM or virtual USB COM 
settings from the drop down Port menu. This specifies the port on the 
evaluation board that will be used for serial data transmission. Please make 
sure that the jumpers on header J7 and J8 are set accordingly. Prior to 
starting serial data capture, please specify the Baud, Parity and Bits settings 
to reflect the parameters at which your serial communication interface is 
operating. Once your port settings are configured, please plug a USB or DB9 
serial cable into the evaluation board and click on the Open Serial Port button. 

This PC-based application is included on the DVD-ROM that accompanies 
the DEMOEM, and may also be found at:

http://www.pemicro.com/fixedlinks/demotoolkit.cfm.

This application allows secure CFV1 and HCS08 microcontrollers to be 
unsecured. The Unsecure application will erase a secure device to make it 
unsecure. This application works with the DEMOEM board as well as other 
user hardware connected to the PC via the USB Multilink or Cyclone PRO 
hardware interfaces.