Voltcraft VC130-1 Digital-Multimeter, DMM, 2000 counts VC130-1 Hoja De Datos

The SELECT button has several functions depending on the measuring range. For function switching, for a relative 

measuring function and for manual selection of the measuring range.

Voltage measuring V (AC/DC)

Manual measuring range selection 

Pressing 1x switches to manual measuring range selection.  

Each further press changes the measuring range.  

To deactivate, keep this button depressed for approx. 2 seconds.  

The display shows “AUTO”. Auto range is active again.

Resistance

Relative measuring 

Pressing 1x saves the displayed value and sets the display to zero. The 

display indicates the difference between the saved value and the actually 

measured value (ideal to exclude the line resistance of the measuring 

leads). The delta icon appears on the display ( ). The automatic measu-

ring range selection is deactivated now.  

To deactivate, keep this button depressed for approx. 2 seconds. The 

display shows “AUTO”.  

Auto range is active again.

Frequency “Hz“

Switching between functions 

Each press switches the measuring function. Pressing 1x duty cycle, 

another press frequency measuring, etc.

Diode test/continuity check

Switching between functions 

Each press switches the measuring function. Pressing 1x “continuity 

check”, another press diode test, etc.

Currency measuring µA/mA/A

Function switching AC/DC 

Each press switches the measuring function. Pressing 1x “AC”, another 

press “DC” etc.

The HOLD button (9) allows you to hold the measuring value on the display. The symbol “H” appears on the display. 

This facilitates reading, e.g. for documentation purposes. Another press will switch back to measuring operation 

again. With the VC170-1, the HOLD function is not available in the frequency measuring range “Hz”.