Gw Instek GSP-830Spectrum analyzer, spectrum analyzerBandwidth (RBW) 3/30/300 kHz/4 MHz GSP-830 Hoja De Datos

meas:tra:read? 

Returns trace data. Parameter:1(traceA), 2(traceB), 3(traceC), 
all(all three traces) Example: meas:read_1? (traceA data) 

meas:tra:a<>b 

Swaps trace A and B. 

meas:tra:a+b>a 

Adds trace B to A. 

meas:tra:a−b>a 

Subtracts trace B from A. 

meas:tra:const? 

Returns the constant value to be added or subtracted. 

meas:tra:const 

Sets the constant value to be added or subtracted. 

meas:tra:a+const>a  Adds a constant value to traceA. 
meas:tra:a−const>a  Subtracts a constant value from traceA. 
meas:tra:det? 

Returns the detection mode. 
Parameter: 1(normal), 2(sample), 3(peak+), 4(avg), 5(qpeak) 

meas:tra:det 

Sets the detection mode. 
Parameter: 1(normal), 2(sample), 3(peak+), 4(avg), 5(qpeak) 
Example: meas:tra:det_4 (set the detection mode to average) 

Power measurement 

 

meas:ch:bw? 

Returns the main channel bandwidth. 
Example: 1000 khz 

meas:ch:bw 

Sets the main channel bandwidth. Need to specify the unit. 
Example: meas:ch:bw_1_mhz (1MHz) 

meas:adjch:bw? 

Returns the adjacent channel bandwidth in kHz. Need to 
specify the channel. 
Example: meas:adjch:bw_2? (adjacent channel2 bandwidth) 

meas:adjch:bw 

Sets the adjacent channel bandwidth. Need to specify CH and 
unit. Example: meas:adjch:bw_2_1_mhz(adj CH2 BW 1MHz) 

meas:adjch:offs? 

Returns the adjacent channel offset in kHz. Specify channel. 
Example: meas:adjch:offs_2? (adjacent channel2 offset) 

meas:adjch:offs 

Sets the adjacent channel offset. Specify channel and unit. 
Example: meas:adjch:offs_2_1_mhz (adjacent ch2 offs 
1MHz) 

meas:acpr? 

Returns ACPR activation status. Parameter: on, off 

meas:acpr 

Turns On/Off ACPR measurement. Parameter: on, off 
Example: meas:acpr_on (ACPR On) 

meas:acpr:lower? 

Returns the lower ACPR result. Need to specify 1 or 2. 
Example: meas:acpr:lower_2? (lower ACPR 2 result?) 

meas:acpr:upper? 

Returns the upper ACPR result. Need to specify 1 or 2. 
Example: meas:acpr:upper_2? (upper ACPR 2 result?) 

meas:acpr:chup 

Moves the ACPR channel up. 

meas:acpr:chdown 

Moves the ACPR channel down. 

meas:chspc? 

Returns the channel space in kHz. 

meas:chspc 

Sets the channel space. Need to specify the unit. 
Example: meas:chspc_10_mhz (10MHz)