Atmel ATSAM3S-EK2 Hoja De Datos
58
Atmel AVR2055
8348D-AVR-06/12
11 Appendix A-3: UC3 specifics
11.1 Getting started
11.1.1 Required hardware
Before installing and using the BitCloud PS SDK for AVR UC3, make sure that all
3. Connectors for each EVK1105 board:
a. Five two-wire cables
b. One USB 2.0 A/Mini-B cable
4. Atmel AVR JTAGICE mkII or Atmel JTAGICE 3
11.1.2 Hardware setup
To prepare the hardware:
1. Install the J12 and J16 extension headers on the board (if not already installed)
1. Install the J12 and J16 extension headers on the board (if not already installed)
2. Install the JTAG header on the board (if not already installed)
3. Use two-wire cables to connect the EVK1105 J16 pins to the corresponding pins
on the REB231 boards, as indicated in
Table 11-1. EVK1105 to radio extender board REB231 pin mapping.
EVK1105 J16 pin
REB231 pin
1
30
2
29
3
28
4
27
5
38
6
26
8
25
9
22
10
20