Blade mCP X BL BNF BLH3980 Hoja De Datos

The Blade mCP X BL 2S Li-Po battery features an 
EFL2 connector that allows you to safely charge your 
battery pack when used with the included Li-Po charger 
and charge adapter. The included fl ight battery is safe to 
charge up to 3C (0.6 Amp).

NOTICE: Use only Horizon Hobby approved battery packs 
and chargers compatible with this product.

1.  Connect the power supply to an appropriate power 

source.

2.  Connect the battery charger to the power supply.
3.    Align the tab on both the battery and charger connectors. Connect the battery to the charger lead. 
4.  Press the Start/Stop button on the charger.
5. Battery charging is complete when the charger LED is solid green.

CAUTION: NEVER attempt to power the charger from an AC outlet without the use of a proper AC to DC 
adapter/power supply.

CAUTION: DO NOT connect charged or discharged Li-Po batteries if the power supply is connected to the 
charger but the power supply is not connected to a power source. Doing so will discharge and possibly 

damage the batteries.

9

1. Remove and inspect contents

2. Charge the fl ight battery

3. Program your computer transmitter

4.  Install the fl ight battery in the helicopter 

(once it has been fully charged)

9

5.  Bind your DSM

®

 compatible transmitter to the 

helicopter.

6. Test the controls

7. Familiarize yourself with the controls

8. Find a suitable area for fl ying