Conrad Thermostat Variable Temperature Switch Kit With Sensor 192082 Hoja De Datos
Los códigos de productos
192082
Pay attention to the adherence to VDE-guidelines! In case measurements are to
be done at the live parts of the circuit, the circuit must then be connected to a
safety-isolating transformer.
be done at the live parts of the circuit, the circuit must then be connected to a
safety-isolating transformer.
In no case should measurements be conducted on the circuit, when it is directly
connected to the mains (risk to life!). Although the circuit is simply a replica, in
case of non-functioning it should be checked only by an expert, because he is
adequately familiar with the applicable safety regulations.
connected to the mains (risk to life!). Although the circuit is simply a replica, in
case of non-functioning it should be checked only by an expert, because he is
adequately familiar with the applicable safety regulations.
2.2
For the first start-up (functional test) please use a separate mains supply,
whose voltage is fed via the rectifier D1 (“+”, at the plus-marking of D1 and “-” at
the minus marking of D1).
the minus marking of D1).