Conrad Thermostat Variable Temperature Switch Kit With Sensor 192082 Hoja De Datos
Los códigos de productos
192082
Important! Must read!
The warranty claim becomes null and void in case of damages arising out of non-
adherence to the instructions for use. We do not assume any liability for
consequential damages caused by this.
adherence to the instructions for use. We do not assume any liability for
consequential damages caused by this.
Table of contents
Page
Intended use …………………………………………………………………………….4
Safety guidelines ……………………………………………………………………….4
Product description ……………………………………………………………………..5
Description of circuit ……………………………………………………………………6
Technical data …………………………………………………………………………..6
General instructions for building a circuit …………………………………………….7
Soldering instructions …………………………………………………………………..9
1. Construction stage I ………………………………………………………………..10
Component diagram ………………………………………………………………….16
Connection / start-up ………………………………………………………………….16
Circuit diagram ………………………………………………………………………...17
Checklist for troubleshooting ………………………………………………………...18
Guarantee ……………………………………………………………………………...21
Note on environmental safety ………………………………………………………..22
Safety guidelines ……………………………………………………………………….4
Product description ……………………………………………………………………..5
Description of circuit ……………………………………………………………………6
Technical data …………………………………………………………………………..6
General instructions for building a circuit …………………………………………….7
Soldering instructions …………………………………………………………………..9
1. Construction stage I ………………………………………………………………..10
Component diagram ………………………………………………………………….16
Connection / start-up ………………………………………………………………….16
Circuit diagram ………………………………………………………………………...17
Checklist for troubleshooting ………………………………………………………...18
Guarantee ……………………………………………………………………………...21
Note on environmental safety ………………………………………………………..22
Note
Persons who produce a building kit or make an assembly operational through
extending or fitting a casing are considered as manufacturers in accordance with
DIN VDE 0869 and are committed to provide all accompanying papers when
supplying the device and also to state his name and his address.
Devices that are put together as assemblies are to be considered as an industrial
product in accordance with technical safety regulations.
extending or fitting a casing are considered as manufacturers in accordance with
DIN VDE 0869 and are committed to provide all accompanying papers when
supplying the device and also to state his name and his address.
Devices that are put together as assemblies are to be considered as an industrial
product in accordance with technical safety regulations.
•
Devices designed for mains operation should be powered only with 230 V 150
Hz alternating voltage.
Hz alternating voltage.
•
The assembly may be operated only at the prescribed voltage.
•
In case the mains cable is damaged, it may be replaced only by an expert.
•
In case of devices with an operating voltage
≥ 35 volt the final assembly may
be done only by an expert in accordance with the VDE-guidelines.