Conrad Thermostat Variable Temperature Switch Kit With Sensor 192082 Hoja De Datos
Los códigos de productos
192082
•
Consumers connected to the assembly may not exceed a connected load of
maximum 500 watt!
maximum 500 watt!
•
The device can be operated in any position.
•
While installing the device, attention must be paid to adequate cable cross-
section of the connection cables!
section of the connection cables!
•
While pulling out the mains cable always pull at the plug and never pull at the
cable. Never place heavy objects on the mains cable and do not bend it in a
very narrow radius or around sharp edges.
cable. Never place heavy objects on the mains cable and do not bend it in a
very narrow radius or around sharp edges.
•
The permissible ambient temperature (room temperature) may not fall short of
or exceed 0°C and 40°C respectively during operation.
or exceed 0°C and 40°C respectively during operation.
•
The device is intended for use in dry and clean rooms.
•
In case condensation takes place, an acclimatisation period of up to 2 hours
must be given.
must be given.
•
It is not permitted to operate the device in the open or in wet rooms!
•
It is advisable to cushion the component properly, in case it is subject to
strong shocks or vibrations. However, please keep in mind that components
can get heated up on the board and can cause fires, if a combustible material
is used for cushioning.
strong shocks or vibrations. However, please keep in mind that components
can get heated up on the board and can cause fires, if a combustible material
is used for cushioning.
•
The device must be kept away from flower vases, bath tubs, washbasins and
all liquids.
all liquids.
•
Protect this component against moisture, splash water and effect of heat!
•
The device may not be used together with easily inflammable and
combustible liquids!
combustible liquids!
•
Assemblies and parts should not fall in the hands of children!
•
The assemblies may be made operational only under supervision of a
competent adult or an expert!
competent adult or an expert!
•
In industrial premises the accident prevention guidelines of the professional
association of the specific industry for electrical systems and resources must
be observed.
association of the specific industry for electrical systems and resources must
be observed.
•
In schools, educational institutions, hobby classes and self-help workshops
the operation of the assemblies must be monitored by a trained person
responsibly.
the operation of the assemblies must be monitored by a trained person
responsibly.
•
Do not operate the assembly in an area, where combustible gases, vapours
or dust is present or else can be present.
or dust is present or else can be present.
•
Use only the original spare parts, if the device needs to be repaired! Use of
any parts other than the original can lead to damage to property and person!
any parts other than the original can lead to damage to property and person!
•
The device may be repaired only by an expert!
•
After use, the device must always be disconnected from the power supply!