DJI 0360005 Hoja De Datos

26 |

V1 Port Description

Please remember the function of each port, which may help you to use the Naza-M efficiently.

Main Controller

For roll control (left/right)

For pitch control (front/back)

For throttle control

For rudder control

For Control Mode Switch

For gimbal pitch control

Or for gain tuning

For D-Bus (S-Bus/ S-Bus2 compatible)

Or for gain tuning

Or for IOC switch

For voltage monitor (Connect with VU V-SEN port)

To #1 rotor

To #2 rotor

To #3 rotor

To #4 rotor

To #5 rotor

To #6 rotor

To gimbal roll servo

Or to #7 rotor (Upgrade the MC Firmware to V3.10 or above)

To gimbal pitch servo

Or to #8 rotor (Upgrade the MC Firmware to V3.10 or above)

LED

LED port, for LED wire connection from Versatile Unit

EXP.

GPS port, for GPS module wire connection.

(In three-pin ports, pins near the nicks are signal pins.)

Versatile

Unit

V-SEN

V-SEN port: To the X3 port of the main controller, for monitoring battery voltage and supplying

power



Orange wire (signal wire) output: ±

±3.3V



Red wire (power wire) output: 3A@5V

LED

LED wire, to LED port of the main controller.

USB port: PC connection for configuration and firmware upgrades.

Optional

GPS & Compass

Connect to the EXP. port.